金相材料学中取得的成就

Metallography and Materials Science Achievements

ASM 金相奖(The ASM Metallographic Award)最佳论文奖每年都会进行评选。IMS期刊中 Materials Characterization 材料特性相关的文章由15位来自IMS技术出版委员会、Buhler标乐团队及期刊编辑顾问委员会的专家学者组成的评委会进行评估。被评为IMS期刊年度最佳金相实验奖的论文作者会获得由Buehler赞助的纪念奖牌及1000美元现金奖。

In Materials Characterization journal

Published DateReceived DateNameTitleVolumeComments
19841985John C LippoldHead of the Welding and Joining Metallurgy Group at Ohio State University
19881989John C LippoldHead of the Welding and Joining Metallurgy Group at Ohio State University
19931994Andrew BriggsDepth measurements of short cracks in perspex withEmeritus Fellow, Wolfson College, Oxford
20062007Joanna Michalska and Maria SonzanskaQualitative and quantitative analysis of σ and χ pVolume 56, pages 355 – 362Department of Materials Science, Silesian University of Technology, Katowice, Poland
20072008Hans J. Leber, Markus Niffenegger and Bernard TirbonodMicrostructural aspects of low cycle fatigued austVolume 58, pages 1006 – 1015Paul Scherrer Institut, Nuclear Energy and Safety Research Department, Laboratory for Materials Behaviour, Villigen PSI, Switzerland
20082009Dennis W. HetznerCrystallography and metallography of carbides in hVolume 59, Number 7Senior Material Specialist, The Timken Co., Canton, Ohio, United States; William Van Geertruyden, General Manager, EMV Technologies, Bethlehem, Pennsylvania, United Starts
20092010S. Otarawanna, C.M. Gourlay, H.I. Laukli and A.K. DahleThe Thickness of Defect Bands in High-Pressure DieVolume 60, pages 1432-1441

IMS 和 Buehler 联名的优秀技术论文奖每年颁发。由 IMS 和 Buehler 联合优秀奖委员会对上一年在 IMS 期刊上发布的金相学,微结构和分析(MMA)的文章进行评判。其中 IMS 委员会,Buehler 和 MMA 编辑顾问委员会各自至少有一名委员会代表,其中 Buehler 委员会成员应担任主席。被评判为金相实验最佳论文的主要作者可 获得由Buehler 提供的纪念奖牌和1,000美元的现金奖励。

In Metallography, Microstructure, and Analysis (MMA)

Published Date Received Date Name Title Volume Comments
2012 2013 A. M. Dalley Full Thickness Decarburization of the Steel Shell Metallogr. Microstruct. Anal. (2012) 1:59–64 US Steel and Research Center
2013 2014 S. Nafisi and R. Ghomashchi Microstructural Evolution of Electromagnetically S Volume 2, Page 96-106 S. Nafisi
EVRAZ INC. NA
P.O. Box 1670
Regina, SK S4P 3C7
Canada
2014 2015 Nizolek, T; Avallone, J.T; Pollock, T.M.; Mara, N.A.; Beyerlein, I.J.; Scott, J.E Processing and Deformation Behavior of Bulk Cu–Nb Volume 3, Issue 6
2015 2016 M. Cohen, D. Ashkenazi, Y.Kahanov, A. Stern, S. Klein, D. Cvikel The Brass Nails of the Akko Tower Wreck (Israel): Metallogr. Microstruct. Anal. (2015) 188-206
2016 2017 Bjorn Domeij, Juan Carlos Hernando, Attila Dioszegi Quantification of Dendritic Austenite After Interr Metallogr. Microstruct. Anal. (2016) 5:28–42
2017 2018 Athanasios Vazdirvanidis and George Pantazopoulos Metallographic Study of Great Anthony Historical B Metallography, Microstructures & Analysis, Volume
In Practical Metallography (PM)
Published Date Received Date Place Name Title Volume Comments
1986 1987 1 M. Kallfass, G. Hörz Metallkundliche Untersuchungen an Zierscheiben ein Praktische Metallographie, Band 24 (1987), Heft 1,
1987 1988 1 R. Ebner, E. Pfleger, F. Jeglitsch, K. Leban, G. Goldschmied, A. Schuler Möglichkeiten der Oberflächenbehandlung metallisch Praktische Metallographie, Band 25 (1988), Heft 10
1988 1989 1 G. Elssner Keramographie und Metallographie von Übergangsbere Praktische Metallographie, Band 26 (1989), Heft 4,
1989 1990 1 A. Schulz, H.-R. Stock, H. Vetters, P. Mayr Metallographie von dünnen Hartstoffschichten Praktische Metallographie, Band 27 (1990), Heft 6,
1990 1991 1 V. Carle, U. Schäfer, U. Täffner, F. Predel, R. Telle, G. Petzow Keramographie von Hochleistungskeramiken – Werksto Praktische Metallographie, Band 28 (1991), Heft 7,
1991 1992 1 J. Woltersdorf, E. Pippel Keramische Werkstoffe. Microstruktur und Grenzfläc Praktische Metallographie, Band 29 (1992), Heft 4,
1992 1993 1 K. Schemme, I. Wiitkamp Gefügeentwicklung und mikroskopische Untersuchungs Praktische Metallographie, Band 30 (1993), Heft 7,
1993 1994 1 E.-M. Langer, M. Schwarz Metallographische Schadensuntersuchung an Bauteile Praktische Metallographie, Band 31 (1994), Heft 4,
1994 1995 1 C. Blank, D. Haubold, H. Wendrock Gefügecharakterisierung gesinterter hochporöser Fi Praktische Metallographie, Band 32 (1995), Heft 6,
1995 1996 1 E. Sachova, G. Schnabel, C. Zurek, J. Laimmer Präparation von Serienschnitten Praktische Metallographie, Band 33 (1996), Heft 10
1996 1997 1 G. Baumeister, B. Skrotzki, G. Eggeler Zielpräparation von Laserspuren in quasikristallbi Praktische Metallographie, Band 34 (1997), Heft 8,
1997 1998 1 I. Gräf Ionenätzen-Stand und Perspektiven für die Gefügeko Praktische Metallographie, Band 35 (1998), Heft 5,
1998 1999 1 L. Echtle, H. Müller Ermittlungen der Ursachen von Schadensfällen mit H Praktische Metallographie, Band 36 (1999), Heft 6,
1998 1999 2 K. Rahts, M. Schorr, C. Schwalm, M. Schütze Wasserfreie Präparationsmethode zum Nachweis von C Praktische Metallographie, Band 36 (1999), Heft 2,
1998 1999 3 U. Portugall, K. Steinlein Schadensanalyse an Kunstoffbauteilen Praktische Metallographie, Band 36 (1999), Heft 8,
1999 2000 1 E. Schaberger, F. Grote, A. Schievenbusch Farbätzung und Farbbildanalyse – Ein Weg zur Chara Praktische Metallographie, Band 37 (2000), Heft 8,
1999 2000 2 H. Scherngell, A. Schnabl, A. Kneissl Gefügeänderungen in Cu-Al-Ni Formgedächtnislegieru Praktische Metallographie, Band 37 (2000), Heft 3,
1999 2000 3 V. Begon, O. Dugne Optimierung der Charakterisierung von thermischen Praktische Metallographie, Band 37 (2000), Heft 10
2000 2001 1 J. Trempler Materialmikroskopie unter besonderer Berücksichtig Praktische Metallographie, Band 38 (2001), Heft 5,
2000 2001 2 U. Täffner Durchlicht-Polarisationsmikroskopie an Hochleistun Praktische Metallographie, Band 38 (2001), Heft 7,
2000 2001 3 G. Benkißer, I. Rühl, C. Ladewig Die Gefüge wärmebehandelter und laserumgeschmolzen Praktische Metallographie, Band 38 (2001), Heft 8,
2001 2002 1 A. Hübner Präparation und Charakterisierung thermisch gespri Praktische Metallographie, Band 39 (2002), Heft 2,
2001 2002 2 I. Haase, O. Trommer, G. Zouhar Carbidkontrastierung in 100 Cr 6 für quantitative Praktische Metallographie, Band 39 (2002), Heft 8,
2001 2002 3 H. Brauner,W. Dudzinski, A. Becker, A. Fischer Präparation und Untersuchung von Gefäßstützen (Ste Praktische Metallographie, Band 39 (2002), Heft 11
2001 2002 3 E. Berghof-Hasselbächer, H.-E. Bühler, O. Greven, M. Schorr, J. Schürhoff, M. Schütze Untersuchungen zum Bauteilversagen von Rostsysteme Praktische Metallographie, Band 39 (2002), Heft 7
2002 2003 1 J. Trempler Materialmikroskopie unter besonderer Berücksichtig Praktische Metallographie, Band 40 (2003), Heft 10
2002 2003 2 B. Arnold, H.-D. Bauer Erfahrungen bei der Querschnittspräparation von Sc Praktische Metallographie, Band 40 (2003), Heft 3,
2002 2003 3 B. Wielage, S. Mücklich Beitrag zum Löten von Magnesiumwerkstoffen Praktische Metallographie, Band 40 (2003), Heft 5,
2002 2003 3 T. Recktenwald, Z. Liu, T. Laurent, F. Mücklich Quantitative Charakterisierung von laserinterferom Praktische Metallographie, Band 40 (2003), Heft 6,
2003 2004 1 V. Kree, J. Bohlen, D. Letzig, K. Kainer Metallographische Gefügeuntersuchungen von Magnesi Praktische Metallographie, Band 41 (2004), Heft 5,
2003 2004 2 A. Breining, G.W. Ehrenstein Ätzen von teilkristallinen Thermoplasten für mikro Praktische Metallographie, Band 41 (2004), Heft 5,
2003 2004 3 E. Exner, M. Rettenmayr, C. Müller Komplexe Grenzflächengeometrien bei Phasenumwandlu Praktische Metallographie, Band 41 (2004), Heft 9,
2004 2005 1 U. Hofmann, A. Bögel, H. Hölzl, H.-A. Kuhn Beitrag zur Metallographie von Kupfer und Kupferle Praktische Metallographie, Band 42 (2005), Heft 7,
2004 2005 2 B. Wielage, S. Mücklich Einfluss der Lotzusammensetzung auf die Gefügeentw Praktische Metallographie, Band 42 (2005), Heft 10
2004 2005 3 E. Unterweger, G. Lojena, A.. Kneissl, I. Anžel Dünne Bänder aus CuAlNi-Formgedächtnislegierungen Praktische Metallographie, Band 42 (2005), Heft 9,
2005 2006 1 J. Angeli, E. Füreder, M. Panholzer, A. Kneissl Ätztechniken für die Phasencharakterisierung von n Praktische Metallographie, Band 43 (2006), Heft 10
2005 2006 2 R. Telle, M. Thönnißen Prähistorische feuerfeste Werkstoffe und ihre Weit Praktische Metallographie, Band 43 (2006), Heft 2,
2005 2006 3 C. Bürger, G. W. Ehrenstein Darstellung verstärkter Kunst¬stoffe mittels RE-De Praktische Metallographie, Band 43 (2006), Heft 4,
2006 2007 1 A. M. Klaska, A. Ohl, E. Kerscher, T. Beck, D. Löhe Gefügedarstellung der stranggepressten Aluminiumkn Praktische Metallographie, Band 44 (2007), Heft 1,
2006 2007 2 B. Matijasevic-Lux, A. Neidel, S. Riesenbeck, T. Ullrich, J. Völker, S. Wallich Heissrissbildung in der Wärme-einflusszone laserge Praktische Metallographie, Band 44 (2007), Heft 9,
2006 2007 3 A. Böbe, D. Regener, G. Dietze, H. Heyse Veränderung bleifreier Mikrolotkontakte bei thermi Praktische Metallographie, Band 44 (2007), Heft 10
2007 2008 1 E. Berghof-Hasselbächer, M. Schütze, M. Schorr, P. Gawenda Entwicklung eines Mikrostrukturatlanten für die ne Praktische Metallographie, Band 45 (2008), Heft 9,
2007 2008 2 U. Etzold, U. Reitz, R. Petzold, F. Friedel, F. Macherey Metallkundliche Charakterisierung des ZnFe-Legieru Praktische Metallographie, Band 45 (2008), Heft 4,
2007 2008 3 A. Neidel, B. Matijasevic-Lux, S. Leggemann, S. Riesenbeck, T. Ullrich, J. Völker, S. Wallich Applikationsbeispiele für ambulante Metallographie Praktische Metallographie, Band 45 (2008), Heft 8,
2008 2009 1 K. Kuhnke Gefügecharakterisierung von Aluminium-Silicium Gus Praktische Metallographie, Band 46 (2009), Heft 12
2008 2009 2 R. Schnitzer, R. Hochfellner, M. Nöhrer, M. Schober, H. Clemens, S. Zinner, H. Leitner Mikrostrukturelle Charakterisierung von PH 13-8 Mo Praktische Metallographie, Band 46 (2009), Heft 10
2008 2009 3 A. Jungmeier, M. Vetter, E. Schmachtenberg Charakterisierung der Struktur teilkristalliner Th Praktische Metallographie, Band 46 (2009), Heft 4,
2009 2010 1 U. Hofmann Eine Schadensanalyse zu den Ursachen für interkris Praktische Metallographie, Band 47 (2010), Heft 10
2009 2010 2 E. Berghof-Hasselbächer, S. Diliberto, P. Gawenda, P. J. Masset, G. Schmidt, M. Schütze Metallographische Untersuchungen der Mikrostruktur Praktische Metallographie, Band 47 (2010), Heft 2,
2009 2010 3 E. Miyama, C. Voit, J. Pühringer, M. Pohl Klassische Ätztechniken und ihre Anwendungen für d Praktische Metallographie, Band 47 (2010), Heft 7,
2011 2012 1 D. Eberlein, P. Schmitt, P. Voos Metallographische Probenpräparation von verlöteten Praktische Metallographie, Band 48 (2011), Heft 5,
2011 2012 2 D. Berger Metallographische Methoden in der Archäologie Praktische Metallographie, Band 48 (2011), Heft 3,
2011 2012 3 H. Clemens, S. Mayer Intermetallische Gamma-Titanaluminid-Basislegierun Praktische Metallographie, Band 48 (2011), Heft 2,
2012 2013 1 K. Reiter, H. Schnarr “Wie genau geht es denn?” – Zielpräparation an mik Praktische Metallographie, Band 49 (2012), Heft 10
2012 2013 2 P. Watermayer, K. Kelm Vibrationspolitur einer Nickelbasis-Superlegierung Praktische Metallographie, Band 49 (2012), Heft 7,
2012 2013 3 C. Hafner, T. Bernthaler, V. Knoblauch, G. Schneider Metallographische Präparation und Gefügecharakteri Praktische Metallographie, Band 49 (2012), Heft 10
2013 2014 1 L. M. Gammon, R. R. Boyer Präparation und Ätzen von Titan zur Dokumentation Praktische Metallographie, Band 50 (2013), Heft 4,
2013 2014 2 J. V. Carstensen, M. Lindegren Qualitätskontrolle an thermisch gespritzten Beschi Praktische Metallographie, Band 50 (2013), Heft 6,
2013 2014 3 M. Pohl Gebrochene Zahnstange einer PKW-Lenkung – Die Vers Praktische Metallographie, Band 50 (2013), Heft 9,
2014 2015 1 M. Ecke, F. Schwarz, L. Krüger, M. Wilke, H. Heyse, U. Wendt, M. Krüger Charakterisierung von Verformungszwillingen in Met Praktische Metallographie, Band 51 (20134), Heft 1
2014 2015 2 C. Weisenberger, G. Guth, T. Bernthaler, V. Knoblauch Neue Ansätze für die Qualitätsbewertung von Lithiu Praktische Metallographie, Band 51 (2014), Heft 1,
2014 2015 3 P. Rossi, M. Engstler, F. Mücklich Verfahren zur Quantifizierung der Homogenität und Praktische Metallographie, Band 51 (2014), Heft 3,
2015 2016 1 J. Biehler, O. Kerbs, H. Hoche und M. Oechsner Gefügedarstellung mittels Ferrofluiden an Stählen
2015 2016 2 G. Weilnhammer Besonderheiten bei der metallographischen Präparat
2015 2016 3 S. Mayer, G. Hawranek, F. Mendez-Martin, M. Panzenböck, S. Pölzl, S. Primig, B. Rashkova und H. Clemens Die Rolle der Metallographie bei Entwicklung und C
2016 2017 1 M. Speicher, R. Scheck, and K. Maile Influence of Different Etchants on the Representat 110385
2016 2017 2 K. E. Freiberg, R. Hanke, M. Rettenmayr, and A. Undisz Surface Preserving Targeted Preparation using Focu 110379
2016 2017 3 M. Schachermayer, T. Klein, H. Clemens, and S. Mayer Preparation Methods for Examining the ωo-Phase For 110368