表面 | 磨料/尺寸 | 负载-磅[N] /样本 | 基本速度[rpm] | 相对旋转 | 时间[分钟:秒] |
---|---|---|---|---|---|
切割 | 聚合物建议使用带30HC刀片的精密切割机 | ||||
镶嵌 | 冷镶嵌料,通常为EpoThin 2环氧树脂 | ||||
CarbiMet砂纸 | 320 [P400] 水冷式金刚砂 | 4 [18] | 300 | 直到变平 | |
CarbiMet砂纸 | 400 [P800] grit SiC水冷式砂轮 | 4 [18] | 300 | 1:00 | |
CarbiMet砂纸 | 600 [P1200] grit SiC水冷式砂轮 | 4 [18] | 300 | 1:00 | |
CarbiMet砂纸 | 1200 [P2500] 水冷式金刚砂 | 4 [18] | 300 | 1:00 | |
TexMet C | 3 µm MetaDi Supreme 金刚石抛光液 | 5 [22] | 150 | 4:00 | |
MasterTex | 0.05 µm MasterPrep Alumina | 3 [13] | 150 | 3:00 |